Reactor
Ø DSLK reactor overview
Capacitors are susceptible to harmonic, the wattless power compensation loop closing inrush current and operating voltage, extremely easy to cause the damage of capacitors and the low power factor, therefore, need to install a series reactor reactance rate in a series capacitor front-end, suppression and harmonic absorption, protection of capacitor, avoid the influence caused by harmonic, closing inrush current or switching overvoltage, thereby significantly improving the reliability and stability of power system.
Ø technical paramete
Item | Content |
Rated voltage | 250V, 400V, 440V, 480V, 525V, 690V etc. |
Phase number | Single-phase or three-phase |
Rated frequency | 50Hz (for 60Hz must be specified) |
Withstand voltage test | Winding of 3KV/1min |
Reactance coefficient | 7%, 14% (other specifications can be customized) |
Rated capacity | Matching capacitor capacity of 15kvar, 25kvar, 50kvaretc. |
Mounting distance | ¡Ý 30mm |
Withstand voltage test | Winding of 3KV/1min |
Loss | ¡Ü 15W/kvar |
The temperature protection | At 65 ¡æ, 120 ¡æ normally closed normally open |
The noise | ¡Ü 50dB |
Linearity | 1.4In-2.0In |
Stable current | ¡Ü 1.35In |
Temperature rise | Coil temperature ¡Ü 75K |
Operating environment | -40 ¡æ to 50 ¡æ, relative humidity of not more than 90% |
Insulation temperature rating | H 180 ¡æ |
Protection grade | IP00, indoor use |
The implementation of standards | IEC60831-1-2002 IEC60831-2-1995 UL810-2008 EIA-456-A-1989 DL/T842-2003 EN60831-1-1998+A1-2003 EN60831-2-1996 GB/T12747.1-2004 GB/T12747.2-2004 |